« Update: Tippmann A-5 with TAC-CAP Q-loader MOD | Zantaz EAS e.mail archive secret "Option 99" »

Tippmann A-5 with Response Trigger installed

Here's a shot of the response trigger installed. Note the yellow line pointing to the piston installed behind the trigger. The stock banjo fitting is replaced with a 2 way "T" that feeds both the cyclone feeder and the trigger piston.


Tippmann A-5 with Response Trigger installed.

I'll be posting an Illustrated step-by-step guide to installing the RT soon...

Posted by John Seaman on September 19, 2005 10:56 PM |

Post a comment

(If you haven't left a comment here before, you may need to be approved by the site owner before your comment will appear. Until then, it won't appear on the entry. Thanks for waiting.)